Tire Preparation
Carefully remove the studs present around the sides of the front and rear tires of the motorcycle.
How to install tire stickers
Our partner Rick has prepared a complete mounting tutorial to easily and accurately apply your tire stickers ✅
No need to be a professional: we guide you step by step, from cleaning the tire to the final installation.
In just a few minutes, your motorcycle will display a unique, clean, and durable look 🏍️💥
② Cleaning of the sides
Thoroughly clean the sides of the tires with acetone to properly degrease the surface. Repeat the process about ten times to ensure that no grease remains on the tire.
③ Stencil Preparation
Remove the stencil from its support to keep only the letters attached to the transfer film.
④ Cleaning of letters
Once the stencil is removed and only the letters are left on the transfer film, clean them with acetone to eliminate any residue before applying the glue.
⑤ Application of the glue
Apply the glue to the back of each letter, covering the entire surface evenly, without excess glue.
Application of stickers
Place the transfer film with the letters on the side of the tire. Apply constant pressure for 30 seconds to ensure good adhesion between the sticker and the tire, then gently remove the transfer film.